High quality steel Solar Powered Led Street Lights and The seismic
- Die-Casting Aluminium Body
- Streamline, simple, fashionable design
- Reasonable lighting distribution technology
- with solar intelligent control system
- Long lifespan
- solar power supply
- Uniform lighting
- No stroboscopic effect; no glare
- solar intelligent controller
- earthquake rating: >8 level
- wind rating: ≥40m/min
- Use of the environment: -25°C to 65°C
- recommended installation spacing: 10~30m
- Parking lot, etc.
|How do LED Street light replace Metal halide or sodium bulbs?|
- 50W LED retrofit kits can replace 70W Metal Halide or HPS bulbs.
- 100W LED retrofit kits can replace 150W Metal Halide or HPS bulbs.
- 150W LED retrofit kits can replace 250W Metal Halide or HPS bulbs.
- 200W LED retrofit kits can replace 400W Metal Halide or HPS bulbs.
Street Pole Description:
● Components surface is sprayed with the powder after hot galvanized
anti-corrosion treatment, smooth surface, non-discolouring , no
pinhole hang, no flow, no peeling phenomenon ;
● Galvanized layer thickness is not less than 85 microns, the coating
thickness is not less than 100 microns.
Introduction to the solar lamp
● The system consists of several parts of the solar cell component
(including the brackets), LED lights, controllers, batteries and
● The lamp holder is used as a light source with a 1W white LED
matrix. Solar power supply system, the battery is good or not
directly affects the performance of the system of comprehensive
cost and service life, our company adopts special gel battery for
solar battery, its service life is more than three times of
ordinary lead-acid maintenance-free batteries, up to 5-8 years!
Reduce the cost of system maintenance;
● The charging and discharge controller has the light control, time
control, over-charge protection, the protection of the protection
and the reverse protection and so on.