High cost performance Solar Powered Led Street Lights of Safe and
led for solar street light
|Solar panel||160W/24V||1 piece|
Polycrystalline solar cell, 156x156mm, 72 piece.
Vm: 36.145V,Im: 7.775A,Voc: 44.949V, Isc: 8.218A
Size:1956x992x50mm with 90cm wires,MC4 Connector.
Warranty: More than 90% output power in 10 years .and more than 80% output
power in 25 years.
The product have passed TUV, IEC, MCS etc certificate.
Single Integrated Power LED(80W),Woking Voltage DC24V,
General luminous:8000lm,LED Luminous Efficiency:100lm/W,
temperature:2700-7000K,Protection Grade :IP65,Working life ≥
Lamp shade is Die-casting aluminum,and its face is UV-resistant and
corrosion resistant .
No bad glare; No Strobe; Start without delay .Low maintenance cost
Production Size :720x320x172mm ,Weight :9.56KG
Packing Size:775x345x258mm,Weight :12.2KG
|Controller||20A||1 piece||PHOCOS CIS Series,12V/24VAutomatic identification , light control
and time control, Protection Grade IP68, waterproof|
Gel Battery; small self -discharge rate,the better deep discharge, Top charge
acceptance, large capacity,strong start in low ,the good shock
resistant and Anti-temperature charge Production
Size: 483x170x240mm,Weight :44.5KG
Packing Size :506x193x290mm,Weight :46.4KG
The two Battery is used in series in this collocation
|Pole and other steel fitting||8M||Set||Best steel Q235 or Q345;hot dip galvanized and powder coated .|
iron plate is rolled into type for one time .
Flange plate :400x400x20mm
Battery body are welded after 2mm plate stamping molding
Lamp arm is Welded with tube and iron plate.
|Wires harness||--||1 piece|
With the special connector ,standardization,substitutability ,high
installing efficiency,saving cost .
Wire harness can be designed according to different lamp type .
|others||Baseplate 20 steel rod ,standard component and so on|
|Conditions||Voltage of system: 24V,working time: 10 hours/day, Working temperature:-20 °C -- +50 °C|
1.The solar led street light system converts the sun energy into
electricity and stores it to provide green illumination.
2.Luminaries utilize High Power white LED with superior thermal
These extremely durable fixtures are waterproof and designed for
multiple applications including indoor and outdoor.
3.Luminaries are supplied fully assembled & ready for either
retrofit or new installations.
◆ Solar street light system is composed by the solar cell
components (including stent), lamps and lanterns of LED lamp, solar
controller, battery (including battery insulation box) and light
pole and so on several parts.
◆ Solar cell components are made of polysilicon solar cells. LED
lights are used for high-power LED lighting.
◆ Controller in light pole, relating to, the control, overcharge,
discharge protection and reverse connect protection, have adjust
the lighting time, half power, intelligent charge and discharge
◆ The battery is placed in an underground storage tank, which is
used in a plastic storage battery.
◆ The solar lamps are fully automatic and do not need to be
excavated, but the lampposts need to be installed on the embedded
parts (concrete base).